9511 ‐ Flasks, Boiling, Flat Bottom

• Uniform wall thickness distribution makes these Flasks ideal for heating
• All sizes have a durable matt-finished enamelled area for marking

9512 - Flasks, Boiling, Flat Bottom, Short Neck, Interchangeable Joint

• Uniform wall thickness distribution makes these Flasks ideal for heating
• All sizes have a durable matt-finished enamelled area for marking
• Equipped with interchangeable joint
• The flat base ensures that the Flask can be placed down even without the supporting ring

9513 ‐ Flasks, Boiling, Round Bottom

• Uniform wall thickness distribution makes these Flasks ideal for heating
• All sizes have a durable matt-finished enamelled area for marking

9514 ‐ E-Flask Without Side Cut For Dissolution Apparatus as per USP

• Vessels confirms to all requirements of USP Ch. 711
• Smooth hemispherical base with no flaws or defects, straight sides and a flat flange
• Graduated inintervals of 50ml
• Ideal for determining the dissolution characteristics of drugs in capsules and tablets

9515 ‐ L-Flask With Side Cut For Dissolution Apparatus, as per USP

• These vessels conform to all the requirements of USP
• Smooth hemispherical base with no flaws or defects, straight sides and a flat flange
• Graduated inintervals of 50ml
• Ideal for determining the dissolution characteristics of drugs in capsules and tablets
• Two side-cuts at the flange

9516 ‐ D-Flasks for Dissolution Apparatus without side cut, as per USP

• These vessels conform to all the requirements of USP
• Smooth hemispherical base with no flaws or defects, straight sides and a flat flange
• Graduated inintervals of 50ml
• Ideal for determining the dissolution characteristics of drugs in capsules and tablets

9517 ‐ Flasks, Boiling, Pear Shaped, Short Neck with Interchangeable Joint

• Made of 3.3 borosilicate glass
• The conical shape makes them ideal for small scale reaction
• Large labelling field

9517 ‐Flasks, Pear Shape Suitable for Rotary Evaporators with Ground Socket

• Rota Vapour Flasks are used along with Rotary Evaporators
• Ideal for heating sensitive solvent solute combinations
• Facilitate the extraction of key components like odour, oil, drugs, natural extract and fragrance

9518 ‐Flasks, (Vessels) Reaction, Wide Mouth with Flat Flange, 100 mm ID, 150mm OD

• Flasks, (Vessels) Reaction, Wide Mouth with Flat Flange, 100 mm ID, 150mm OD
• The top is finely ground to ensure a leak-resistant fit with the cove
• Facilitate the extraction of key components like odour, oil, drugs, natural extract and fragrance

9519 ‐Lids, for Flasks Reaction Cat No. 9519, Flat Flange and Inter-changeable Joint

• Flasks, (Vessels) Reaction, Wide Mouth with Flat Flange, 100 mm ID, 150mm OD
• The top is finely ground to ensure a leak-resistant fit with the cove
• Facilitate the extraction of key components like odour, oil, drugs, natural extract and fragrance

9521 ‐Flasks, Round Bottom, Two Necks, Centre Neck and One Angled Side Neck, With Interchangeable Joints

• Uniform wall thickness distribution and the round-bottom shape make them ideal for heating
• The shape facilitates uniform heating
• Accessories, thermometer, column, dropping funnels, boiling capillaries, etc., canbe fitted depending upon the application
• Generally used in distillation and extraction processes
• One neck is centred and vertical. The side neck is inclined at an angle of 20 to the vertical neck

9522 ‐Flasks, Round Bottom, Two Necks, Centre Neck and One Parallel Side Neck, with interchangeable Joints

• Uniform wall thickness distribution and the round-bottom shape make them ideal for heating
• The shape facilitates uniform heating
• Accessories, thermometer, column, dropping funnels, boiling capillaries, etc., canbe fitted depending upon the application
• Generally used in distillation and extraction processes
• One neck is centred and vertical. The side neck is inclined at an angle of 20 to the vertical neck

9523 ‐Flasks, Round Bottom, Three Necks, Centre Neck and Two Angled Side Necks, with interchangeable Joints

• Uniform wall thickness distribution and the round-bottom shape make them ideal for heating
• The shape facilitates uniform heating
• Accessories, thermometer, column, dropping funnels, boiling capillaries, etc., canbe fitted depending upon the application
• Generally used in distillation and extraction processes
• One neck is centred and vertical. The side neck is inclined at an angle of 20 to the vertical neck

9524 ‐Flasks, Round Bottom, Four Necks, Centre Neck and Three Angled Side Neck, with Interchangeable Joints

• Uniform wall thickness distribution and the round-bottom shape make them ideal for heating
• The shape facilitates uniform heating
• Accessories, thermometer, column, dropping funnels, boiling capillaries, etc., canbe fitted depending upon the application
• Generally used in distillation and extraction processes
• One neck is centred and vertical. The side neck is inclined at an angle of 20 to the vertical neck

9525 ‐Flasks, Round Bottom, Four Necks, Centre Neck and Three Angled Side Neck, with Interchangeable Joints

• Uniform wall thickness distribution and the round-bottom shape make them ideal for heating
• The shape facilitates uniform heating
• Accessories, thermometer, column, dropping funnels, boiling capillaries, etc., canbe fitted depending upon the application
• Generally used in distillation and extraction processes
• The centred neck is vertical. All the three side necks are inclined at an angle of 20 to the vertical neck
• The two side necks are 180 apart, and a third side neck is at 90 from the other two necks

9526 ‐Flasks, Round Bottom, Four Necks, Centre Neck and Three Parallel Side Neck, with Interchangeable Joints

• Uniform wall thickness distribution and the round-bottom shape make them ideal for heating
• The shape facilitates uniform heating
• Accessories, thermometer, column, dropping funnels, boiling capillaries, etc., canbe fitted depending upon the application
• Generally used in distillation and extraction processes
• All the four necks are vertical. The two side recks are 180⁰ apart
• The two side necks are 180 apart, and a third side neck is at 90 from the other two necks

9600 ‐Flasks, Culture, Haffkine

• The large, flat bottom surface ensures uniform culture growth
• Typically used for the preparation of culture in nutrient media

9700 ‐Flasks, Distilling, With Side Arm

• Uniform wall thickness distribution makes these Flasks ideal for heating
• Suitable for distillation process

9701 ‐Flasks, Distilling with I/C joint 19/26 as per ASTM D86

9702 ‐Flasks, Erlenmeyer, Conical, Narrow Mouth

• Uniform wall thickness distribution makes these Flasks ideal for heating
• The conical form makes them suitable for mixing liquids
• The easy-to-read scale and large labelling field facilitate easy marking
• Graduated from 25ml to 5000ml

9703 ‐Flasks, Erlenmeyer, Conical, Long Neck without Rim

• Uniform wall thickness distribution makes these Flasks ideal for heating
• Ideal for culture work
• Long neck designed for cotton plugs and metal caps
• The conical form makes them suitable for mixing liquids
• The easy-to-read scale and large labelling field facilitate easy marking

9704 ‐Flasks, Conical, Without Rim

• Uniform wall thickness distribution makes these Flasks ideal for heating
• Ideal for culture work
• Long neck designed for cotton plugs and metal caps
• The conical form makes them suitable for mixing liquids
• The easy-to-read scale and large labelling field facilitate easy marking

9705 ‐Flasks, Erlenmeyer, Conical, Narrow Mouth with interchangeable Joint

• Uniform wall thickness distribution makes these Flasks ideal for heating
• Equipped with interchangeable joints
• The conical form makes them suitable for mixing liquids
• The easy-to-read scale and large labelling field facilitate easy marking

9706 ‐Flasks, Tilt Measure

• Ideal for dispensing fixed volume of liquid
• Accuracy + 5% can be achieved
• Easy to use
• Manufactured from chemically resistance 3.3 borosilicate tubing

9707 ‐Flasks, Erlenmeyer, Conical, Narrow Mouth with Interchangeable stopper

• Uniform wall thickness distribution makes these Flasks ideal for heating
• The conical form makes them suitable for mixing of liquid
• These Flasks can be closed with a glass stopper

9708 ‐Flasks, Conical with Screw Cap

• Uniform wall thickness distribution makes these Flasks ideal for heating
• The conical form makes them suitable for mixing of liquid
• These Flasks can be closed with a glass stopper
• The caps are made of PP

9709 ‐Flasks, Erlenmeyer, Conical, Wide Mouth

• Uniform wall thickness distribution makes these Flasks ideal for heating
• The conical form makes them suitable for mixing of liquid
• The easy-to-read scale and large labelling field facilitate easy marking
• Designed with a wide neck that makes cleaning and filling easier

9710 ‐Flasks, Filtering, Bolt Neck, with Tubulation

• These Flasks are blown in special moulds
• The shape is designed to impart maximum mechanical strength
• The neck finish is designed for strength and to ensure good stopper fit
• Ideal for use with Bucher Funnel Category No. 36060 and Gooch Crucible No. 32060 with Sintered Discs that have different porositiesa

9711 ‐Flasks, Iodine Determination, ith Interchangeable Stopper

• These Flasks are made especially for the determination of Iodine value according to the methods of ASTM D-29
• Large labelling field for easy marking
• The handle of the stopper projects above the liquid seal, facilitating its removal

9712 ‐Flasks, Kjeldahl, Round Bottom, Long Neck

• These Flasks are specially designed for nitrogen/protein determination as per the Kjeldahl method
• Designed with a tooled neck for greater strength and a better stopper fit

9713 ‐Flasks, Kjeldahl, Round Bottom, Interchangeable Joint

• These Flasks are specially designed for nitrogen/protein determination as per the Kjeldahl method
• Designed with a tooled neck for greater strength and a better stopper fit